How to Setup auto Power On?

How to Setup auto Power On?

In this tutorial I will show you how you can setup your computer in order to automatically power on after power outage. This guide can be very helpful for people that using iKOOLCORE R1 for router/firewall in their homelab.

  1. Power on R1 and press "F2" enter BIOS (CMOS) setup utility;
  2. Inside BIOS menu, look under the "Chipset" menu to find for a setting named "PCH-IP Configuration"
  3. Set the “State After G3” setting to “S0 State”.
  4. Click "Save changes and Exit" under "Save & Exit" menu.
Back to blog